> Z-Finder EVF Pro
Zacuto Z-Finder EVF Pro 3.2-inch high resolution monitor (includes EVF flip model & optical viewfinder) that supports all current z-finder models for use with DSLR camera for video use - Z-FIND-EVFP
€701.61 + VAT
$900.78 No VAT
Price Match Pledge
We pledge to match the price on most products offered by a UK based dealer that are selling officially imported or manufactured UK stock with full manufacturer warranty and is authorised to do so by the relevant manufacturer
Please fill out the form below with the details of where you have found the cheaper item.
CVP additional terms and conditions for price match.
Prior to the point of sale CVP will eneavour to match the price on most products subject (but not limited) to the following criteria:
- The competitor must be UK based and an officially appointed dealer for the manufacturer of the goods in question
- The competitor must have the goods in stock and available for purchase
- The competitor's price can be verified in writing
- The goods and level of after sales support on offer must be identical (model number must be identical with identical warranty)
- We do not price-match eBay or Amazon sellers.
For further details please call us on 01527 854222.
Full Terms and Conditons can be found in our Terms of Service.
Zacuto Z-Finder EVF Pro 3.2-inch high resolution monitor (includes EVF flip model & optical viewfinder) that supports all current z-finder models for use with DSLR camera for video use
Z-Finder EVF Pro – This is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder, which will snap onto the frame on the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames. The Z-Finder Extender Frames allow you to further adjust the focal point of the Z-Finder by semi-permanently stacking the frames via a snap fit on to the skirt of the Z-Finder until the LCD screen is in focus for you. If you want to be able to use your Z-Finder on your camera LCD screen, you will need to purchase the gorilla plate and frame separately. It is not included in this kit.
Zacuto is changing the game again! We are transforming the form factor of DSLR cameras for video use with our Z-Finder EVF. The Z-Finder EVF is a 3.2” high resolution monitor that will be used in conjunction with all the Z-Finder models. The Z-Finder EVF allows you to operate the DSLR camera with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder EVF. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.
Zacuto Z-Finder EVF 3.2” monitor has higher resolution than DSLR LCD screens. These screens have a resolution of 640×480 on a 3:2 aspect ratio screen. Therefore, you only effectively see the resolution at 640×360 in 16×9. The Zacuto Z-Finder EVF monitor resolution is a true 800×480 making the resolution 56% greater than the on-board DSLR camera screens. The Zacuto monitor also has a tighter dot pitch which also improves the quality, making you see a much tighter pixel pattern.
- Actual 16×9 screen
- 800×480 resolution
- .087 dot pitch
- Focus Assist
- Iris Assist
- HDMI loop through
- Operates off Canon LP-E6 Camera battery (1/2 day power)
- Includes a hot shoe mount or optional articulating arm kit.
- Can mount to other manufacturer's rig (RedRock, Cinevate, Letus, etc.) via 1/4 20 screw, 15mm rod or articulating arm
- All Z-Finder models snap on and off the EVF and can be used interchangeably between the camera screen or EVF screen
- Includes mini HDMI cable
| Size | 3.2 inch TFT LCD IPS LED |
| Resolution | 800 X 480 |
| Colour | 16.7M |
| Viewing Angle | H:170 Degrees V:170 degrees |
| View Area | 70.6mm (H) X 42.76mm (V) |
| Battery | 7.2V canon LP-E6 or Equivalent |
| External | 12 Volt Power Adapter Optional |
| Video Input/Output | HDMI 480i/480p/576p/720p/1080i |
| Operating Temperature | -4F to +158F / -20C to +70C |
| Storage Temperature | -22F to +176F / -30C to +80C |
| Power Consumption | 2.5W (5.2 hours w/1800mAH Battery) |
- 3.2 inch Monitor
- HDMI Cable
- Rechargeable Battery
- Battery Charger
- Hotshoe EVF Mount
- Complete EVF with Diopter & Anti-Fog
- Z-Finder Flip-Up Design
Viewfinders
Lately I bought the Zacuto Z-Finder EVF Pro at your online store. The Zacuto home page (http://www.zacuto.com/zfinderevf) states under evf specifications that the evf can handle 1080p. Unfortunately the evf tells me "unsupported video format 1080p-YUV422 when I set the video output of my camera (Sony FS100) to 1080p.Can you help me?
pm
Does this come with the 2.5x or the 3x Z-finder? Thanks
ds
Ask us a Question
Please enter your question into the field
Write a review about this product
Please enter a short title to your review e.g Tapeless Camera Proves Invaluable in dusty Afganistan
Please enter your full review detailing its performance, features, how reliable and easy it was to use. (Max 300 Words)
Please give the product a star rating for the following:
Please select your rating for:-
| Shopping Basket 0 Item(s): | £0.00 |
|||||||||
|
Estimated Shipping:
|
|
-- |
||||||||
| Total inc. VAT: | £0.00 |
200x200.jpg "Kessler Low Profile Ball Head 1/4-20")
